The Tech Inc. Silton 4950 Pro Max Seawater SDI Analyser is the seawater build of the Silton 4950. It runs the same unattended ASTM D4189 test with automatic filter-roll change, on two channels, with every metallic wetted part in 316L, seawater-compatible EPDM or fluoroelastomer seals, a non-metallic pump head and a GRP cabinet for coastal sites.
At a glance: two channels · 316L wetted metallics · EPDM or fluoroelastomer seals · GRP cabinet IP55 · automatic filter-roll change · ASTM D4189
Main components
- Two filter heads with automatic filter-roll change, 0.45 µm
- Booster pump with non-metallic head, about 2.2 L/min at 2.1 bar
- Filter holder, piping and valve bodies in 316L; EPDM or fluoroelastomer seals
- PLC controller with 7-inch colour touch screen
- 4–20 mA with HART, RS-485 Modbus RTU and volt-free SDI-high contact
- GRP cabinet, IP55, with cable glands
Applications: seawater desalination plants, filtered seawater for cooling and injection, coastal power stations and SWRO pilot plants.
Send your water source, sample points and signal requirements to mail@techincresearch.com or call +1 (289) 622-1032 for a datasheet and quotation.


