Electro-Hydraulic Wellhead Control Panel

• Single-well panel – one panel dedicated to one wellhead.
• Multi-well panel – several well control sections served by one hydraulic power section.
• Hardwired logic – relay-based shutdown and sequencing for simple, fixed functions.
• PLC logic – programmable logic with interface to DCS, ESD system or RTU.
• Onshore wellsite build – for powered onshore wellsites in production and injection service.
• Offshore platform build – for wellhead platforms with offshore-grade enclosure and finish.

• Tight integration with the plant – direct interface to the DCS, ESD system or RTU.
• High availability – duty and standby electric pumps with accumulators.
• Fast, direct response – a direct-acting high-pressure solenoid valve for each wellhead valve.
• Continuous monitoring – pressure transmitters on the supply, logic and control-line headers.
• Pump protection – reservoir level transmitter with low-level shutdown.
• Hazardous-area ready – Ex d motors and Ex d, IP66 solenoid valves.
• Clean signal wiring – separate junction boxes for analogue and digital signals.

Hydraulic supply: up to 10,000 psi standard | Motors: Ex d, 400 V 3-ph or site voltage | Solenoid valves: Ex d, IP66 | Enclosure: SS 316L | Signals: 4-20 mA, digital I/O, Modbus

Safety logic to API RP 14C / ISO 10418; NACE MR0175 / ISO 15156 materials; IEC 60079 hazardous-area equipment; IEC 61511 when a SIL is specified.

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: pressure and level transmitters on every critical header, and a local control station with local and remote selection.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.