top of page
< Back

Capillary Flow Porometry Testing Service

Home › Products › Laboratory & Analytical › Capillary Flow Porometry Testing Service

We measure the through-pore structure of your membranes, filter media, nonwovens, battery separators and hollow fibres by capillary flow porometry. A wetted sample is pressurised with gas; the pressure at which flow starts and the wet and dry flow curves give the largest pore, the mean flow pore size and the full distribution.

What we measure

• Bubble point (largest through-pore)
• Mean flow pore size
• Pore size distribution
• Gas permeability from the dry curve
• Results on flat sheets, hollow fibres and small cartridges

Methods and standards

Capillary flow porometry to ASTM F316 and ASTM E1294, with the wetting liquid chosen for your material. Pore range from about 0.013 to 500 µm.

Samples

Flat-sheet discs of 25 mm or larger, hollow fibres or small cartridges. Three specimens per material are recommended so that spread can be reported.

How it works

• Enquiry. Tell us the material, the properties you need and how many samples you have.
• Quotation and sample form. We confirm the method, standard, price and turnaround, and send a sample submission form.
• Testing. Samples are tested on Tech Inc. instruments in our laboratory, with repeat runs where the method calls for them.
• Report. You receive a PDF report with method, conditions, results tables and curves, plus the raw data on request.

Samples and results are handled confidentially, and we can sign a non-disclosure agreement before testing. Contract testing is also a low-cost way to confirm that an instrument suits your materials before you buy one.

Send your enquiry to mail@techincresearch.com or call +1 (289) 622-1032.

Read: Membrane porometry · Porometry vs mercury porosimetry

Frequently asked questions

How is porometry different from mercury porosimetry?
Porometry measures only through-pores that let fluid pass, which controls filtration. Mercury porosimetry measures all pore volume, including blind pores.

Can you test under compression?
Yes, with our compression porometer for gas diffusion layers, separators and felts.

Request a quotationWhatsApp an engineerRequest a test certificate

Browse the range (2)

WHY TECH INC.

One partner from specification to commissioning

✓  Part of an engineering group founded in 1990

✓  Trusted by universities and R&D laboratories worldwide

✓  Equipment supplied to national oil companies and refineries

✓  Offices in Canada, India, Estonia and Saudi Arabia

You share the process data and the duty. We do the engineering homework, build the system in our own facilities and prove it on the test bench before it ships, so your team can focus on results.

Need it built to your specification?

Every Tech Inc. system is engineered to your process data, P&ID and standards, then built and factory-tested in our own facilities in Chennai, India, with full documentation. Send your specification to mail@techincresearch.com for a P&ID, GA drawing and quotation.

Request a quotationWhatsApp an engineer

bottom of page