top of page

The Tech Inc. Membrane Contactor CO2 Capture Test Rig tests hollow-fibre membrane contactors that bring flue gas and a capture solvent together without mixing them. Gas flows through the fibres while the solvent flows on the shell side; CO2 crosses the membrane and is absorbed. The rich solvent is heated in a cross exchanger, regenerated in a stripper with a reboiler, cooled and returned, so the rig measures CO2 removal, mass-transfer coefficient and solvent loading over long runs, including the slow loss of performance when pores start to wet.

At a glance: Hollow-fibre gas–liquid contactor · lean and rich solvent loop · stripper and reboiler · CO2 removal and mass-transfer coefficient · long-run wetting tests

Download the datasheet (PDF)

 

Main components

  • Mass flow controllers for CO2, N2 and air
  • Hollow-fibre membrane contactor holder
  • Lean solvent tank, pump and flow meter
  • Lean/rich cross exchanger
  • Stripper column with reboiler and overhead condenser
  • CO2 analysers on gas in, gas out and stripper product
  • Control cabinet with PLC, HMI and reports

 

Applications: Membrane contactor developers; solvent developers comparing amines, amino acid salts and carbonates in contactors; universities studying pore wetting and mass transfer in capture.

 

Send your membrane modules, solvent and test conditions to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.

Membrane Contactor CO2 Capture Test Rig

bottom of page