top of page

Liquid Permeability of Cores: Steady-State Method and Return Permeability

Writer: Tech Inc
Tech Inc
6 hours ago
1 min read

At a glance. A steady-state liquid permeameter pumps brine or oil through a confined core at constant rate and measures the pressure drop. Darcy's law gives permeability: k = q·µ·L ÷ (A·ΔP). The Tech Inc. Steady-State Liquid Permeameter uses a pulse-free syringe pump, a transfer vessel and back pressure control.

Good practice

  • Saturate fully first, with a core saturator.

  • Filter fluids to avoid plugging the core face.

  • Several rates: check that permeability does not change with rate (no fines or inertia effects).

  • Steady state: wait until pressure is constant over several pore volumes.

  • Temperature: record it, because viscosity changes with temperature.

Return permeability tests

  1. Measure initial permeability to formation brine.

  2. Expose the core to the test fluid (drilling mud filtrate, completion brine, scale inhibitor).

  3. Flow back in the production direction.

  4. Return permeability = final ÷ initial.

Frequently asked questions

Why is liquid permeability lower than gas permeability? Gas slips at pore walls; the Klinkenberg-corrected gas value approaches the liquid value.

Can it be upgraded? Yes, to a full core flooding system.

Send your core and fluid details to mail@techincresearch.com.

Comments


bottom of page