top of page

Closed-Loop Hydraulic Pressure Control for Test Rigs and Core Holders

Writer: Tech Inc
Tech Inc
4 hours ago
1 min read

At a glance. A hydraulic power pack supplies oil; proportional valves and a controller hold the pressure at the test circuit to a set point, ramp or cycle, using a pressure transducer as feedback. The Tech Inc. Automated Hydraulic Pressure Control System packages pump, accumulator, valves and PLC on one skid.

Typical applications

  • Confining pressure for core holders and triaxial cells.

  • Hydraulic presses and forming tests.

  • Actuator and cylinder testing.

  • Slow cyclic fatigue tests.

What to specify

  1. Maximum pressure and required accuracy.

  2. Flow needed for the fastest ramp.

  3. Static hold, ramp or dynamic cycling.

  4. Number of output channels.

  5. Oil type, cleanliness and temperature control.

  6. Interfaces to the test controller.

Frequently asked questions

Why an accumulator? It smooths pump pulsation and supplies short bursts of flow.

How fast can it cycle? Servo valves allow faster cycles; for impulse tests see our cyclic pressure test system.

Comments


bottom of page