Emulsion Polymerisation: Reactor Set-Up and Feed Control

At a glance. In emulsion polymerisation, monomer droplets are dispersed in water with surfactant, and polymer particles grow from radicals made by a water-soluble initiator. Most industrial latexes are made semi-batch: monomer pre-emulsion and initiator are fed over hours. The Tech Inc. Emulsion Polymerisation Reactor controls those feeds by balance and holds the batch temperature.
Why feed control matters
Particle size and number depend on the seed stage and surfactant feed.
Composition of copolymers depends on the feed rate of each monomer.
Heat removal: feed rate sets the heat released; too fast and the batch overheats.
What the reactor needs
Element | Purpose |
Jacketed vessel and circulator | temperature control |
Stirrer with torque reading | mixing and viscosity tracking |
Balance-controlled feed pumps | accurate feed profiles |
Condenser and nitrogen | inert atmosphere, monomer reflux |
Data logging | repeatable recipes and scale-up |
Frequently asked questions
Glass or stainless? Glass for visibility at atmospheric pressure; stainless for pressurised gaseous monomers.
Scale-up? Keep feed time, heat removal per volume and mixing similar.
See also our high-pressure reactors. Contact mail@techincresearch.com.





Comments