top of page

Methane and CO2 Adsorption Isotherms for Shale, Coal and CCS

Writer: Tech Inc
Tech Inc
6 hours ago
1 min read

At a glance. A high-pressure volumetric analyser expands methane or CO2 from a reference cell into a cell of crushed rock at reservoir temperature, step by step up to several hundred bar. The pressure drop at each step gives the gas adsorbed, building a Langmuir isotherm. The Tech Inc. High-Pressure Gas Adsorption Isotherm Analyser runs four samples in parallel.

Why it matters

  • Gas in place: adsorbed gas can be a large share of the total in shale and nearly all of it in coal.

  • Production forecasts: desorption controls late-life rates.

  • CO2 storage and ECBM: coal and organic shale adsorb CO2 more strongly than methane.

Key parameters

Parameter

Meaning

Langmuir volume

maximum adsorbed gas at infinite pressure

Langmuir pressure

pressure at half the Langmuir volume

Excess vs absolute adsorption

correction for the adsorbed phase density

What makes good data

  1. Accurate void volume by helium expansion.

  2. Leak-tight cells and stable bath temperature.

  3. Real-gas equations of state for methane and CO2.

  4. Moisture-equilibrated samples where the reservoir is wet.

Frequently asked questions

Volumetric or gravimetric? Volumetric handles large samples well; gravimetric suits small samples and very accurate low-uptake work.

How long does a test take? Typically one to several days for a full isotherm, depending on equilibration.

Ask mail@techincresearch.com for a configuration.

Comments


bottom of page