top of page

Cement Thickening Time and the HPHT Consistometer

Writer: Tech Inc
Tech Inc
5 hours ago
1 min read

At a glance. An HPHT consistometer turns the slurry in a rotating cup inside a pressure vessel while following the well's pressure and temperature schedule. A paddle measures consistency in Bearden units (Bc); thickening time is the time to reach the chosen limit, often 70 or 100 Bc. The Tech Inc. HPHT Cement Consistometer runs API RP 10B-2 schedules automatically.

What the test shows

  • Thickening time against the planned pumping time plus a safety margin.

  • Right-angle set: a sharp rise in consistency, preferred for gas-tight cement.

  • Gelation or bumps that can signal additive problems.

Running good tests

  1. Mix the slurry to the standard procedure.

  2. Choose a schedule matching bottom-hole circulating temperature and pressure.

  3. Calibrate the potentiometer or sensor regularly.

  4. Check temperature calibration of the slurry thermocouple.

Frequently asked questions

What limits apply? Many operators test to 2 to 6 hours and up to about 1400 bar and 260 °C for deep wells.

Atmospheric consistometers? They condition slurries for other tests but do not reproduce downhole pressure.

Comments


bottom of page