How to Choose a Back Pressure Regulator for Floods and Reactors

At a glance. A back pressure regulator (BPR) opens only when the upstream pressure exceeds its set point, so it holds pressure behind it constant. Dome-loaded BPRs set the point with gas pressure on a diaphragm, giving fine, stable control at low flows. Tech Inc. High-Pressure Back Pressure Regulators cover microflow to pilot scale.
Dome-loaded or spring-loaded?
Feature | Dome-loaded | Spring-loaded |
Set point | gas pressure on dome | spring compression |
Stability at low flow | excellent | good |
Remote or computer set point | yes, via dome regulator | no |
Cost | higher | lower |
Choosing a BPR
Pressure range and required stability.
Flow range, including the lowest flow.
Fluids: two-phase, corrosive, solids.
Temperature, which sets seat and diaphragm material.
Connections and dead volume.
Frequently asked questions
Why does my BPR chatter? Oversized flow capacity, gas–liquid slugs or a soft set point; a smaller orifice and dome loading usually help.
Can it be computer-controlled? Yes, with an electronic dome regulator from our pressure control system.
Contact mail@techincresearch.com.





Comments