Ultrasonic Velocities and Dynamic Moduli of Rock Cores

At a glance. Transducers on each end of the core send compressional (P) and shear (S) pulses through it. Arrival times and core length give the velocities; with bulk density, they give dynamic elastic moduli. The Tech Inc. Acoustic Velocity System for Rock Cores measures P and two orthogonal S waves.
From velocity to moduli
Poisson's ratio: ν = (Vp² − 2Vs²) ÷ [2(Vp² − Vs²)]
Young's modulus: E = ρ·Vs²·(3Vp² − 4Vs²) ÷ (Vp² − Vs²)
Good practice
Flat, parallel core ends.
Thin couplant layer for P waves; shear couplant for S waves.
Calibrate system delay with a steel or aluminium standard.
Pick the first arrival consistently.
Two orthogonal S waves reveal anisotropy.
Uses
Calibrating sonic logs and seismic models.
Wellbore stability and sand production studies.
Hydraulic fracture design.
Frequently asked questions
Dynamic or static moduli? Dynamic moduli from velocities are usually higher than static moduli from loading tests; correlations link the two.
Why test under stress? Velocities rise with confining stress as cracks close; our confined version measures this.
Contact mail@techincresearch.com.





Comments