top of page

The Tech Inc. Silton 4950 Pro Automatic SDI Analyser measures the silt density index (SDI) of RO and NF feed water to ASTM D4189 without an operator at the instrument. A roll of 0.45 µm filter replaces the single filter disc: after every test the drive winds on a fresh section, so the analyser runs test after test, day and night, and sends each SDI result and alarm straight to the plant control system.

At a glance: ASTM D4189 · automatic filter-roll change · SDI-15 0 to 6.67 · 4–20 mA, HART, RS-485 Modbus · IP55 cabinet · one or two channels

Download the datasheet (PDF)

 

Main components

  • Automatic filter-roll drive and filter head for 47 mm test area, 0.45 µm
  • Diaphragm booster pump and pressure regulator holding 2.07 bar (30 psi)
  • Intelligent volume sensing and PLC controller with 7-inch colour touch screen
  • Line-pressure gauge and electrically actuated valves
  • 4–20 mA output with HART, RS-485 Modbus RTU and volt-free SDI-high alarm contact
  • IP55 powder-coated wall cabinet with cable glands

 

Applications: seawater and brackish RO plants, power-station water treatment, industrial process water, ultrapure water lines and RO pilot plants that need SDI around the clock.

 

Send your water source, sample points and signal requirements to mail@techincresearch.com or call +1 (289) 622-1032 for a datasheet and quotation.

Silton 4950 Pro Automatic SDI Analyser

bottom of page