The Tech Inc. Pressure Swing Adsorption (PSA / VPSA) Test Unit runs complete pressure swing adsorption cycles on your adsorbent, so purity, recovery and productivity can be measured before a plant is designed. Two to four adsorber beds are connected by automated valves; the controller steps them through pressurisation, adsorption, pressure equalisation, blowdown, purge and, in vacuum swing, evacuation. A product tank evens out the flow, and analysers on product and tail gas give purity and recovery for every cycle. Cycle steps and times are set from the HMI, so new cycle designs can be tried without changing pipework.
At a glance: Two to four beds · programmable PSA, VPSA and TSA cycles · equalisation steps · product tank · purity and recovery per cycle
Main components
- Two to four adsorber columns with temperature sensors along each bed
- Automated on/off valves on the feed, product, equalisation, purge and exhaust lines
- Feed compressor or gas supply with pressure control
- Vacuum pump for VPSA cycles
- Product tank with back-pressure control
- Analysers on product and tail gas
- Control cabinet with PLC, programmable cycle editor, HMI and data logging
Applications: Adsorbent makers proving zeolites, activated carbons and MOFs in real cycles; CO2 capture from flue gas and biogas; hydrogen purification; nitrogen and oxygen from air; universities developing new PSA cycles.
Send your sorbents, gases and test conditions to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.


