top of page

The Tech Inc. Silton 4950 Pro Max Seawater SDI Analyser is the seawater build of the Silton 4950. It runs the same unattended ASTM D4189 test with automatic filter-roll change, on two channels, with every metallic wetted part in 316L, seawater-compatible EPDM or fluoroelastomer seals, a non-metallic pump head and a GRP cabinet for coastal sites.

At a glance: two channels · 316L wetted metallics · EPDM or fluoroelastomer seals · GRP cabinet IP55 · automatic filter-roll change · ASTM D4189

Download the datasheet (PDF)

 

Main components

  • Two filter heads with automatic filter-roll change, 0.45 µm
  • Booster pump with non-metallic head, about 2.2 L/min at 2.1 bar
  • Filter holder, piping and valve bodies in 316L; EPDM or fluoroelastomer seals
  • PLC controller with 7-inch colour touch screen
  • 4–20 mA with HART, RS-485 Modbus RTU and volt-free SDI-high contact
  • GRP cabinet, IP55, with cable glands

 

Applications: seawater desalination plants, filtered seawater for cooling and injection, coastal power stations and SWRO pilot plants.

 

Send your water source, sample points and signal requirements to mail@techincresearch.com or call +1 (289) 622-1032 for a datasheet and quotation.

Silton 4950 Pro Max Seawater SDI Analyser

bottom of page