top of page

The Tech Inc. Hydroprocessing and Reforming Pilot Plant tests hydroprocessing and reforming catalysts under refinery conditions. Liquid feed and hydrogen flow down through one or two fixed catalyst beds in a tubular reactor heated in zones; products are cooled and separated in high- and low-pressure separators, gas is metered and liquid collected for analysis, and the control system holds each condition for days so the catalyst reaches steady state.

At a glance: to about 200 bar and 550 °C · about 20 to 500 mL catalyst · one, two or parallel reactors · HP and LP separators · unattended operation

Download the datasheet (PDF)

 

Main components

  • One or two tubular reactors with multi-zone furnaces and thermowells
  • High-pressure liquid feed pumps on balances
  • Hydrogen and gas mass-flow controllers to about 200 bar
  • High- and low-pressure separators with level control
  • Back-pressure regulation and wet gas meter
  • PLC/SCADA with unattended operation and safety interlocks

 

Applications: refinery and national oil company R&D, catalyst makers, universities and research institutes working on hydrotreating, hydrocracking, renewable diesel and reforming.

 

Send your process data and specification to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.

Hydroprocessing and Reforming Pilot Plant

bottom of page