The Tech Inc. Flue-Gas CO2 Membrane Test System (Humidified Mixed Gas) tests CO2 capture membranes under the conditions they will meet behind a boiler, furnace or kiln: a mixture of CO2 and nitrogen with oxygen, water vapour and traces of sulphur dioxide. Mass flow controllers blend the simulated flue gas, a humidifier sets its water content, and heated lines carry it to flat-sheet cells in an oven. The permeate leaves under vacuum or a sweep gas, and CO2 analysers or a gas chromatograph measure feed and permeate, so permeance and CO2/N2 selectivity are measured on wet, realistic gas.
At a glance: Simulated flue gas: CO2, N2, O2, H2O and SO2 · vacuum or sweep permeate · flat-sheet cells in an oven · NDIR or GC analysis
Main components
- Mass flow controllers for CO2, N2, O2, SO2 and sweep gas
- Humidifier in a temperature-controlled bath, with heated feed lines
- Oven with one or more flat-sheet membrane cells
- Dry vacuum pump and permeate pressure control, or sweep-gas mode
- Cold trap for permeate water
- NDIR CO2 analysers on feed and permeate, or gas chromatograph
- Control cabinet with PLC, touch-screen HMI and reporting software
Applications: Development of facilitated-transport, fixed-site-carrier, polymer and mixed-matrix membranes for post-combustion capture; ageing tests on humid and SO2-bearing gas; universities and R&D centres in carbon capture.
Send your membranes, gases and test conditions to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.


