Pleated Amine Filter Cartridges

• TI-AM36P – 36-inch pleated amine filter cartridge for gas plant amine units.
• Carbon bed pre-filter and after-filter duty – cartridges upstream and downstream of the activated carbon bed, with rating to client specification.
• Other lengths and end fittings – made to match the plant's housing, to client specification.

• Element length: 36-inch (TI-AM36P), with other lengths to client specification
• Construction: pleated media on a rigid core with outer support wrap
• Micron rating: to client specification, selected for the solids loading and filter position
• Service: lean and rich amine solvents in gas sweetening units
• Seals: elastomers selected for amine compatibility, or to client specification
• Fit: interchangeable replacement for common OEM designs
• Operating limits: temperature and differential pressure to the housing rating and client specification

Amine filters are used in gas processing plants, refineries, LNG plants and sour gas fields wherever an amine unit removes H2S and CO2. The cartridges sit in the lean amine line to the contactor, in rich amine service ahead of the regenerator, and around the carbon beds that remove dissolved hydrocarbons and degradation products.

• Fewer foaming upsets – solids removal keeps the solvent stable and the contactor on specification.
• More media per housing – pleated construction gives high dirt-holding capacity for the housing size.
• Drop-in fit – interchangeable with common OEM housings, with no change to filter vessels.
• Cleaner equipment – less fouling of the lean/rich exchanger, reboiler and contactor trays.
• One source – supplied with gas coalescers and corrosion-monitoring parts from one catalogue.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – the same engineering team supplies the gas coalescers, corrosion access fittings and injection quills used around the amine unit, giving one source for its consumables.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Gas Coalescer Filter Elements – inlet coalescers that keep hydrocarbon liquids out of the amine.
• Corrosion Monitoring Access Fittings and Injection Quills – corrosion monitoring for the amine circuit.
• Filter Separator and Coalescer Skid – skid-mounted filtration ahead of the contactor.
• Chemical Injection Skid – antifoam and corrosion inhibitor dosing.