top of page
< Back

Ultrafiltration Test Cells

Home › Products › Membrane & Filtration › Ultrafiltration Test Cells

Precision ultrafiltration test cells for membrane performance evaluation. Laboratory platform for UF research and development.

Tech Inc. ultrafiltration test cells are standardised laboratory platforms for evaluating ultrafiltration membranes, with excellent sealing and pressure stability. Each cell is designed, built and factory-tested in-house.

How to choose an ultrafiltration test cell

Configuration. Dead-end stirred cells suit quick screening of small volumes; crossflow cells reproduce flow along the membrane as in a module.

Pressure rating. UF usually runs at 1 to 10 bar; choose a rating above your highest test pressure.

Membrane area and sealing. A larger active area gives more permeate and steadier readings; O-rings and the cell body must suit the feed chemistry.

Rejection testing. For MWCO work, the cell must allow permeate sampling during the run, and the feed must be stirred or recirculated to limit concentration polarisation.

What to send for a quotation

Membrane coupon size, MWCO range, feed solution, maximum pressure and temperature, and dead-end or crossflow.

Read: How to measure membrane MWCO

Frequently asked questions

How is MWCO measured in a UF cell?
Filter a mixture of dextrans or PEGs of known size, analyse feed and permeate, and find the molecular weight rejected by 90%.

Why stir the feed?
Stirring sweeps retained solutes away from the membrane surface, so the measured rejection reflects the membrane rather than the boundary layer.

Request a quotationWhatsApp an engineerRequest a test certificate

Products in this range (6)

WHY TECH INC.

One partner from specification to commissioning

✓  Part of an engineering group founded in 1990

✓  Trusted by universities and R&D laboratories worldwide

✓  Equipment supplied to national oil companies and refineries

✓  Offices in Canada, India, Estonia and Saudi Arabia

You share the process data and the duty. We do the engineering homework, build the system in our own facilities and prove it on the test bench before it ships, so your team can focus on results.

INSIGHTS

AI and your process data

AI in Membrane Research: Why Consistent Lab Data Decides the Result →

 

Need it built to your specification?

Every Tech Inc. system is engineered to your process data, P&ID and standards, then built and factory-tested in our own facilities in Chennai, India, with full documentation. Send your specification to mail@techincresearch.com for a P&ID, GA drawing and quotation.

Request a quotationWhatsApp an engineer

bottom of page