top of page
< Back

Forward Osmosis Test Cells

Home › Products › Membrane & Filtration › Forward Osmosis Test Cells

Specialized forward osmosis test cells with osmotic control. Laboratory platform for FO membrane development.

Tech Inc. forward osmosis test cells are specialised platforms for evaluating membranes under osmotic driving forces, with precise control of feed and draw solution exposure. Trusted by universities and R&D laboratories worldwide.

How to choose a forward osmosis test cell

Configuration. Dead-end stirred cells suit quick screening of small volumes; crossflow cells reproduce flow along the membrane as in a module.

Pressure rating. FO runs at low pressure, but both channels must be sealed against leaks between feed and draw.

Membrane area and sealing. A larger active area gives more permeate and steadier readings; O-rings and the cell body must suit the feed chemistry.

Two channels. Feed and draw solutions flow on opposite sides; the membrane can face either way (active layer to feed or to draw), and both orientations are usually tested.

What to send for a quotation

Membrane coupon size, feed and draw solutions, temperature, flow rates on each side and how you will measure water flux and reverse salt flux.

Read: Forward osmosis vs reverse osmosis

Frequently asked questions

How is water flux measured in FO?
From the change in mass of the draw or feed solution over time, logged on a balance.

What is reverse salt flux?
Draw solute that passes back into the feed. It is measured from the rise in feed conductivity.

Request a quotationWhatsApp an engineerRequest a test certificate

Products in this range (1)

WHY TECH INC.

One partner from specification to commissioning

✓  Part of an engineering group founded in 1990

✓  Trusted by universities and R&D laboratories worldwide

✓  Equipment supplied to national oil companies and refineries

✓  Offices in Canada, India, Estonia and Saudi Arabia

You share the process data and the duty. We do the engineering homework, build the system in our own facilities and prove it on the test bench before it ships, so your team can focus on results.

INSIGHTS

AI and your process data

AI in Membrane Research: Why Consistent Lab Data Decides the Result →

 

Need it built to your specification?

Every Tech Inc. system is engineered to your process data, P&ID and standards, then built and factory-tested in our own facilities in Chennai, India, with full documentation. Send your specification to mail@techincresearch.com for a P&ID, GA drawing and quotation.

Request a quotationWhatsApp an engineer

bottom of page