The Tech Inc. High-Pressure Oil-Removal Coalescer Skid removes oil aerosol, droplets and fine solids from gas leaving a lubricated compressor, before the gas reaches storage, dispensers, analysers or downstream process units. Oil carried over from cylinder lubrication fouls catalysts, membranes, meters and fuel-cell users, and this skid stops it at the source.

Main components

Pre-filter housing for bulk liquid and solids
One or two high-pressure coalescer housings with coalescing elements
Duty/standby isolation and bypass valves
Differential pressure gauges or transmitters on each housing
Automatic or manual drains to a closed drain pot
Relief valve, vent and sample points on a structural skid

Applications: CNG and hydrogen compressor discharge, process gas compressors, instrument and fuel gas after compression, gas injection and booster packages.

Send your process data and specification to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.

High-Pressure Oil-Removal Coalescer Skid

Single-stage coalescer – one coalescer housing for clean services.

Two-stage skid – particle pre-filter followed by a high-efficiency coalescer.

Duty/standby skid – twin trains for element changes without stopping the compressor.

Polishing version – adds an activated-carbon adsorber for oil vapour.
Design pressure: to client specification, including high-pressure CNG and hydrogen service

Design code: pressure parts designed to ASME VIII, or client specification

Wetted materials: carbon steel or SS316, or to client specification

Elements: coalescer grades selected to the required outlet oil content

Instrumentation: differential pressure across each stage; level indication on drain pots
Protects downstream equipment – oil stopped before it reaches meters, membranes and catalysts.

Rated for the duty – housings designed for the compressor discharge pressure.

Element changes on line – duty/standby trains keep the compressor running.

Same supplier for elements – replacement coalescer elements from our filter range.
Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.

Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.

Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).

Trusted by Saudi Aramco – an established supplier to Saudi Aramco.

Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.

Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).

For this product – we build the housings, the skid and the replacement elements, so one supplier answers for the whole duty.
Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.
Oil-Removal Coalescers: Why Every Gas Compressor Discharge Needs One

Gas Filter and Coalescer Elements: How to Choose the Right Element for Each Duty
Seal Gas Conditioning Skid – seal gas conditioning for the same compressors.

Gas Coalescer Filter Elements – replacement coalescer elements.

Filter Separator and Coalescer Skid – filter separators for the compressor suction.

Gas Booster Unit – gas boosters for high-pressure service.