Reverse Osmosis Test Cells
Home › Products › Membrane & Filtration › Reverse Osmosis Test Cells
Heavy-duty reverse osmosis test cells for high-pressure evaluation. Durable laboratory platform for RO membrane research.
Tech Inc. reverse osmosis test cells are purpose-built for high-pressure evaluation of RO membranes, with robust construction and precision fittings. Spend your time on the membrane, not the cell.
How to choose a reverse osmosis test cell
Configuration. Dead-end stirred cells suit quick screening of small volumes; crossflow cells reproduce flow along the membrane as in a module.
Pressure rating. Brackish water RO tests run up to about 40 bar and seawater tests up to about 70 bar, so the cell, fittings and seals must be rated above that.
Membrane area and sealing. A larger active area gives more permeate and steadier readings; O-rings and the cell body must suit the feed chemistry.
Crossflow conditions. A feed spacer in the channel and a set crossflow velocity reproduce the conditions in a spiral-wound element.
What to send for a quotation
Membrane coupon size, maximum pressure, feed salinity and temperature, crossflow velocity and the number of cells in parallel.
Read: How to test RO membrane performance in the lab
Frequently asked questions
What pressure does an RO cell need?
Above your highest test pressure: about 15.5 bar for standard brackish water tests and about 55 bar for seawater tests, with a margin.
How are flux and rejection measured?
Permeate mass over time gives flux; conductivity of feed and permeate gives salt rejection once the membrane has compacted.
Request a quotationWhatsApp an engineerRequest a test certificate
Products in this range (5)
WHY TECH INC.
One partner from specification to commissioning
✓ Part of an engineering group founded in 1990
✓ Trusted by universities and R&D laboratories worldwide
✓ Equipment supplied to national oil companies and refineries
✓ Offices in Canada, India, Estonia and Saudi Arabia
You share the process data and the duty. We do the engineering homework, build the system in our own facilities and prove it on the test bench before it ships, so your team can focus on results.
INSIGHTS
AI and your process data
AI in Membrane Research: Why Consistent Lab Data Decides the Result →
Need it built to your specification?
Every Tech Inc. system is engineered to your process data, P&ID and standards, then built and factory-tested in our own facilities in Chennai, India, with full documentation. Send your specification to mail@techincresearch.com for a P&ID, GA drawing and quotation.






