The Tech Inc. Vacuum Reactor Sampler takes samples from reactors, stills and vessels that run under vacuum, where an ordinary sample valve would pull air in rather than let liquid out. A sample chamber is first evacuated below the reactor pressure, so liquid flows into it through a dip tube; the chamber is then isolated, brought to atmospheric pressure with nitrogen and drained into a closed bottle.
At a glance: full vacuum to about 6 barg · about 50 to 250 mL · vacuum-chamber, venturi or overflow type · 316L, C-276 or PTFE-lined · nitrogen vacuum break
Main components
- Dip tube or bottom connection into the reactor
- Evacuable sample chamber with sight glass
- Vacuum connection to the plant vacuum or a venturi on nitrogen
- Isolation valves interlocked by one handle
- Nitrogen break and back-purge valve
- Closed bottle holder and vent
Applications: pharmaceutical and fine-chemical reactors, polymer and resin reactors under vacuum, solvent stills, and deodorisers and dryers in edible-oil and oleochemical plants.
Send your process data and specification to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.


