top of page

The Tech Inc. Tube-in-Tube Cooler Sampling Panel for Hot Liquids cools a hot liquid sample before anyone touches it. The sample runs through the inner tube of a coiled tube-in-tube cooler while cooling water flows the other way in the outer tube, so the sample leaves cool, at a steady temperature and without flashing. Gauges, a thermometer, needle valves and a relief valve sit on the same stainless panel, with a cylinder or bottle connection below.

At a glance: to about 400 °C and 100 bar inlet · outlet typically below 40 °C · counter-flow tube-in-tube cooler · 316 stainless · cylinder or bottle

Download the datasheet (PDF)

 

Main components

  • Tube-in-tube or coil-in-shell sample cooler in 316 stainless
  • Inlet isolation and needle valves
  • Pressure gauge and bimetal thermometer on the cooled sample
  • Relief valve on the sample side
  • Cooling-water inlet and outlet with flow indicator
  • Cylinder or bottle connection with drip tray

 

Applications: refinery hot-oil, residue and product streams, boiler feed water and condensate, hot process liquids in chemical plants, and heat-transfer fluid systems.

 

Send your process data and specification to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.

Tube-in-Tube Cooler Sampling Panel for Hot Liquids

bottom of page