Seal Gas Filter Elements

• Seal-gas coalescing elements – remove liquid aerosols from the primary seal-gas supply.
• Particle elements, 3 µm – fine particle filtration for the seal-gas supply.
• Particle elements, 1 µm – finer filtration where the seal design calls for it.
• Booster and separation-gas filter elements – for the booster circuit and the separation-gas line.
• TI-SG70G – glass-fibre seal-gas coalescing element.
• TI-SG70S – welded stainless steel felt seal-gas filter element.

• Particle ratings: 3 µm and 1 µm, with others to client specification
• Element types: coalescing, particle, booster and separation-gas
• Fit: interchangeable replacement for common OEM designs, with dimensions and seals measured from reference elements
• Housings: duplex arrangements allow element change while running
• Service: process gas, nitrogen or air used as seal, booster or separation gas
• System standard: for dry gas seal support systems designed to API 692 or client specification
• Operating limits: pressure, temperature and differential pressure to the housing rating and client specification

Seal-gas filter elements are used wherever centrifugal compressors run on dry gas seals: in gas processing plants, refineries, LNG trains, fertiliser plants, petrochemical complexes and pipeline compressor stations. Typical duties include hydrogen recycle and wet gas compressors in refineries, and export and reinjection compressors in gas fields.

• Protects the seal – clean, dry seal gas is the first defence against dry gas seal failure.
• Change while running – elements suit duplex housings, with one side serviced while the other stays on line.
• Drop-in fit – interchangeable with common OEM housings, with dimensions and seals taken from reference elements.
• Full set from one source – coalescing, particle, booster and separation-gas elements in one catalogue.
• Proven construction – coalescing elements share the construction of our gas coalescer range.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – engineered by the team that designs and builds our seal gas conditioning skids, with the complete seal-gas supply in view.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Seal Gas Conditioning Skid – the heater, knock-out, coalescer and booster skid for the same seals.
• Gas Coalescer Filter Elements – 30-inch coalescers for the main gas train.
• Filter Separator and Coalescer Skid – compressor suction filtration upstream of the seal-gas take-off.