The Tech Inc. Plastic-to-Liquid and Hydrothermal Liquefaction Pilot Plant tests the circular-fuel routes that refineries and waste companies are now evaluating. In the plastic-to-liquid version, shredded plastic is melted and cracked in a heated reactor and the vapours are condensed into oil, wax and gas; in the hydrothermal-liquefaction version, a wet biomass or sludge slurry is pumped through a reactor at high pressure and temperature, where it turns into a bio-crude that separates from water.
At a glance: about 1 to 20 kg/h · pyrolysis at about 400 to 550 °C · HTL at about 300 to 350 °C and 150 to 250 bar · oil, wax and gas fractions · full mass balance
Main components
- Feed hopper and extruder or slurry pump
- Heated reactor: stirred batch, screw or tubular
- Condensers and receivers for oil and wax fractions
- Gas cooling, metering and flare or scrubber
- Char or solids removal
- PLC with temperature, pressure and mass-balance logging
Applications: refinery R&D, waste-management and recycling companies, CSIR and university research groups, and technology developers scaling up circular-fuel processes.
Send your process data and specification to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.


