Sampling Cabinet for H2S and Moisture Analysers

• TI-SCS-HS – sampling cabinet for H2S and moisture analysers.
• H2S, moisture or combined duty – one cabinet serving one analyser or both, to client specification.
• Yearly filter kit – membranes, coalescer elements and regulator rebuild parts, with a service visit.

• Sample: natural gas, sweet or sour
• Measurements served: H2S and moisture
• Pressure reduction: heated regulator, with inlet and outlet pressures to client specification
• Heating: thermostat-controlled, sized to keep the sample above its dew point
• Filtration: membrane separator, coalescer and particle filters
• Wetted materials: stainless steel, with inert-treated surfaces for H2S service, or to client specification
• Analyser interface: to the analyser maker's sample requirements
• Hazardous area: electrical equipment selected for the hazardous-area classification, or to client specification

Sales gas contracts and pipeline specifications set limits on H2S and water content, and gas sweetening and dehydration units are run against these readings. The cabinet serves the outlets of these units at gas processing plants, sales gas and pipeline metering points, and gas compression plants handling sour gas.

• Representative sample – heating and a short sample path prevent condensation and H2S losses on wetted surfaces.
• Safe handling – a closed sample path, vent to a safe location and gas detection.
• Analyser protection – liquids and dirt removed before the analysers.
• Easy maintenance – yearly kits of membranes, coalescers and regulator parts.
• Matched range – the same design basis as our GC and mercury cabinets.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – cabinets built with the sour-gas sampling practice of our gas sampling panels and analyser systems.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Heated Sampling Cabinet for Gas Chromatographs – the matching heated cabinet for gas chromatographs.
• Mercury Analyser Sampling System – two-stream conditioning for mercury analysers.
• Analyser Shelter – houses the analysers and their cabinets.
• Analyser Sample Membrane Filters and Filter Tubes – replacement membranes and filter tubes for the cabinet.