Fuel Gas Conditioning Skid

• For gas turbines – conditions gas to the turbine maker's fuel specification for cleanliness, superheat and supply pressure.
• For gas engines – filtration, regulation and metering sized for gas engines and generator sets.
• For heaters and boilers – clean, regulated gas to fired heater and boiler burners.
• Duplex designs – duplicated filtration with changeover valves, for maintenance while the skid stays online.

• Superheat: typically 28 °C (50 °F) above hydrocarbon dew point, or to client specification
• Filtration: typical removal to 0.3 µm, or to client specification
• Heater: electric or shell-and-tube, sized to the flow and required superheat
• Outlet pressure: regulated to the consumer's supply pressure, or to client specification
• Flow: sized to the fuel demand of the turbine, engine or heater
• Pressure vessels: designed to ASME VIII or client specification
• Materials: selected for the gas composition and design conditions, or to client specification

In power generation the skid supplies gas turbines and gas engines with fuel gas at the condition the machine maker specifies. Compressor stations use it for the fuel of turbine- and engine-driven compressors, and refineries and gas processing plants use it for fired heaters and boilers. Offshore, it conditions fuel gas for platform power generation and utilities.

• Protected combustion equipment – knock-out drum and filtration to 0.3 µm keep liquids and solids out of turbines, engines and burners.
• No condensation downstream – superheat above the hydrocarbon dew point stops liquids forming in the supply line.
• Stable fuel pressure – regulation holds the supply pressure within the consumer's limits.
• Online maintenance – duplex designs allow element changes without interrupting fuel supply.
• Vessels and elements from one factory – filter elements, housings and pressure vessels are made by Tech Inc.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product: knock-out drum, filter separator, heater and regulation sized together from your gas composition and the consumer's fuel specification.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Filter Separator and Coalescer Skid – the filtration stage of this skid, also supplied standalone.
• Gas Sampling System – representative fuel gas samples for composition and dew-point checks.
• Gas Dehydration Skid (TEG / Molecular Sieve) – removes water where the fuel gas does not meet its water dew-point specification.
• Pressure Reducing and Metering Station – pressure reduction and metering at the plant inlet, upstream of the skid.