top of page

The Tech Inc. Fracture-Conductivity Cell and Proppant Crush Tester measures how well a propped fracture conducts fluid under closure stress, and how much a proppant crushes. Proppant is packed between core or metal platens in a conductivity cell, a hydraulic press applies the closure stress, and brine flows through the pack at temperature while pressure drop and pack width are measured; the crush tester loads a proppant sample in a die and the fines are sieved.

At a glance: closure to about 1,000 bar · to about 150 °C · one or stacked cells · differential pressure and width measured · crush tester

Download the datasheet (PDF)

 

Main components

  • Conductivity cells with platens and side ports
  • Hydraulic press bought from a specialist, with load control
  • Brine pump and back-pressure regulator
  • Differential-pressure transducers and width measurement
  • Heaters for the cells
  • Crush cell with piston and sieves

 

Applications: stimulation and fracturing laboratories, proppant makers and buyers, and universities studying fracture flow.

 

Send your process data and specification to mail@techincresearch.com or call +1 (289) 622-1032 for a P&ID, GA drawing and quotation.

Fracture-Conductivity Cell and Proppant Crush Tester

bottom of page