top of page

The Tech Inc. FILTON 4950 Pro Automatic MFI Analyser measures the modified fouling index (MFI-0.45) of RO and NF feed water without an operator at the instrument. It runs the same constant-pressure filtration through a 0.45 µm, 47 mm membrane as an ASTM D4189 SDI test, records the filtered volume against time throughout, and calculates MFI from the cake-filtration part of the curve. A roll of filter replaces the single disc, so tests run on schedule, day and night, and every result goes to the plant control system.

At a glance: MFI-0.45 · automatic filter-roll change · 0.45 µm, 47 mm, 2.07 bar · 4–20 mA and RS-485 Modbus · IP55 cabinet

Download the datasheet (PDF)

 

Main components

  • Automatic filter-roll drive and filter head for 47 mm test area, 0.45 µm
  • Diaphragm booster pump and pressure regulator holding 2.07 bar (30 psi)
  • Continuous volume sensing and PLC controller with 7-inch colour touch screen
  • Line-pressure gauge and electrically actuated valves
  • 4–20 mA and RS-485 Modbus RTU outputs to PLC, SCADA or DCS, with alarm contacts
  • IP55 powder-coated wall cabinet with cable glands

 

Applications: RO and NF plants on feeds with a high fouling potential, such as seawater, surface water and wastewater reuse; pretreatment trials comparing media filters, UF and coagulant doses; pilot plants; and research on particulate fouling.

 

Send your water source, sample points and signal requirements to mail@techincresearch.com or call +1 (289) 622-1032 for a datasheet and quotation.

FILTON 4950 Pro Automatic MFI Analyser

bottom of page