Compressor Suction Scrubber Skid

• Single scrubber – one vessel at the compressor inlet.
• Interstage scrubbers – one vessel between each compressor stage.
• Scrubber with filter – adds a filter or coalescer stage for fine liquids.
• Packaged with seal gas – supplied with the compressor seal-gas skid.

• Design pressure: to client specification
• Design code: ASME VIII, or client specification
• Materials: carbon steel, low-temperature carbon steel or stainless steel
• Mist eliminator: wire mesh or vane pack, sized to the gas flow
• Instrumentation: level transmitter, high-level switch and pressure gauge

Every reciprocating and screw compressor needs a suction scrubber. Plants replace scrubbers when gas conditions change or when old vessels fall out of inspection.

• Compressor protection – liquids removed before they reach the machine.
• Automatic drains – level control empties the vessel without operator action.
• Shutdown on high level – high-level switch trips the compressor before liquid carries over.
• Sized to the duty – vessel and mist eliminator sized to the actual gas flow.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – we supply the scrubber together with seal gas and coalescer skids, so one supplier covers the gas treatment around the compressor.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Compressor Suction Scrubbers: The Simplest Way to Protect a Compressor
• Fuel Gas Conditioning Skids: How to Size Filtration, Superheat and Pressure Control

• Seal Gas Conditioning Skid – seal gas conditioning for the same compressor.
• High-Pressure Oil-Removal Coalescer Skid – oil removal on the compressor discharge.
• Filter Separator and Coalescer Skid – filter separators for fine liquids.