Hydraulic Oil Flushing Unit

• Electric-drive skid – for plant and workshop flushing where site power is available.
• Diesel-drive trailer unit – for remote sites, pipelines and field work without a power supply.
• High-flow unit – with a large pump to reach turbulent flow in large-bore lube and seal oil piping on compressors and turbines.
• Compact unit for control tubing – for small-bore wellhead control, HPU and hydraulic tubing.
• Unit with online particle counter – for continuous cleanliness monitoring and an automatic record of the flush.

• Faster clean-up – a pump sized for turbulent flow in the system piping lifts contamination that slower circulation leaves behind.
• Flushing at temperature – the heater brings oil to flushing temperature, lowering viscosity and improving turbulence.
• Proof of cleanliness – sampling and particle-counter connections verify the ISO 4406 or NAS 1638 target before sign-off.
• Filters changed on condition – coarse and fine filtration with differential-pressure indication.
• Protection for new equipment – flushing to the specified cleanliness before commissioning reduces early wear of pumps, valves and bearings.
• Controlled conditions – flow meter and temperature and pressure instruments confirm the flushing conditions throughout the job.
• Works anywhere – electric or diesel drive, on a skid or a trailer.

Flow: to achieve turbulent flow in the system | Filtration: down to 3 µm absolute | Cleanliness target: ISO 4406 or NAS 1638 class as specified | Drive: electric or diesel

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: pump and filtration sized to reach turbulent flow in your piping, with sampling points to demonstrate the specified cleanliness class.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.