Coolant Treatment Skid for Data Centre Liquid Cooling

• TI-CTS-150 – single-loop treatment skid for a cooling loop of up to 2 MW of IT load.
• TI-CTS-600 – hall-level treatment skid at 600 L/min, serving several loops.
• BESS loop configuration – the same treatment duty on battery energy storage cooling loops.

• Loop size: up to 2 MW of IT load per TI-CTS-150, or to client specification
• Treatment flow: typically 600 L/min for the TI-CTS-600, or to client specification
• Coolant: water with about 25% propylene glycol (PG25), or to client specification
• Filtration grade: to the cold-plate requirement or client specification
• Monitoring: glycol concentration, turbidity, pressure, flow and temperature
• Wetted materials: stainless steel
• Bought-in equipment: proven pumps and sensors from leading makers, integrated into a skid designed and built by Tech Inc.
• Controls: PLC with alarm and data link to the BMS or SCADA

Liquid-cooled AI server halls circulate coolant through cold plates with fine channels, where particles, corrosion products and drifting glycol concentration lead directly to blocked plates and hot spots. The skid holds coolant quality on CDU secondary loops in colocation, enterprise and hyperscale data centres, and on the liquid-cooling loops of battery energy storage systems.

• Continuous treatment – side-stream filtration and dosing without shutting the loop down.
• Protects cold plates – removes particles before they block fine cooling channels.
• Early warning – inline glycol and turbidity readings flag problems before they reach the servers.
• Stainless construction – the skid adds no corrosion products to the coolant.
• CDU-independent – connects through side-stream tie-ins, whatever the CDU make.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – skids built and tested in-house, with our crews available to flush and fill the loop before the skid goes into service.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Flush-and-Fill Rig for Liquid Cooling Loops – cleans and fills the loop before the treatment skid takes over.
• PLC, RTU and SCADA Control Packages – monitoring and data links for coolant systems.
• Hydraulic Oil Flushing Unit – the same filtration and flushing practice applied to oil systems.