Making Your Own Hollow Fibre Test Modules

At a glance. Tech Inc. Lab Hollow Fibre Module Housing Kits contain shells, end caps, ports and seals ready for potting.

Steps

1. Count fibres for the target area.

2. Bundle and seal fibre ends.

3. Pot one or both ends with epoxy or polyurethane.

4. Cut back to open the bores.

5. Leak test, then measure flux.

Tips

• Use a clear shell to see wetting and air.

• Record fibre count and active length.

Frequently asked questions

Can you pot modules for us? Yes, from your fibres.

Contact mail@techincresearch.com.