Pressurised Hydrocarbon Automatic Sampling – Condensate, NGL and LPG

• In-line high-pressure sampler – probe-mounted sampler grabbing directly from the main line.
• Fast-loop high-pressure sampler – sampler in a side loop where direct insertion is impractical.
• Duty and standby receivers – switched floating-piston receivers for uninterrupted sampling.
• Portable floating-piston receivers – for transport of the pressurised composite to the laboratory.
• Heated or insulated enclosure – to protect the sampler and receivers from ambient extremes.
• Condensate, NGL or LPG service – sampler, receivers and pre-charge arrangement matched to the stream's vapour pressure.

• No loss of light ends – the composite stays above its bubble point from grab to laboratory.
• Representative composite – flow-proportional control from the metering system.
• Continuous sampling – receiver switching between duty and standby receivers.
• Safe laboratory handling – laboratory transfer and mixing arrangements for the pressurised receiver.
• Rated for the line – high-pressure sampler and receivers to the line class, typically Class 600 to Class 1500.
• Recognised practice – ISO 3171 and API MPMS Chapter 8.2 sampling, ASTM D3700 cylinders and GPA 2174.

Pressure: to the line rating, Class 600 to Class 1500 typical | Receivers: floating-piston, sized to the batch | Wetted materials: SS 316L standard | Pre-charge: nitrogen

ISO 3171 and API MPMS Chapter 8.2 for automatic sampling; ASTM D3700 for floating-piston cylinders; GPA 2174.

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: floating-piston receivers with nitrogen pre-charge and mixing, keeping the composite above its bubble point from grab to laboratory.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.