Chemical Injection Skid

• Single-point skid – one chemical to one injection point, the standard arrangement for a well, flowline or process unit.
• Multipoint skid – one pump header feeding several injection points, each with its own flow control.
• Multi-head and multi-compartment skid – several chemicals from one compact package with a compartmented tank.
• Solar-powered skid – for remote sites without grid power or instrument air.
• Pneumatic or gas-driven skid – air- or gas-driven pumps where electrical equipment is not available or not wanted.
• Portable unit – a self-contained skid or trolley for temporary dosing, trials and backup.

• Accurate dosing – API 675 metering pumps with a calibration column to verify the actual rate.
• Continuous treatment – duty and standby pumps keep injection going during maintenance.
• Protected pumps and lines – suction strainer, pulsation dampener, relief valve and back-pressure valve.
• Protected chemicals – breather or nitrogen blanketing keeps air and moisture out of the storage tank.
• Remote monitoring – alarms and remote signals to DCS or RTU from the local control panel.
• Ready to install – drip tray, lifting lugs and forklift pockets on a single base frame.
• Suited to the climate – heat tracing and insulation for cold sites, sun shade for desert service.

Injection rate: from a few litres per day to several cubic metres per hour per line | Discharge pressure: up to 10,000 psi with plunger pumps | Tank: SS 316L, 200 L to 10 m3 typical | Wetted materials: SS 316L standard; alloys for aggressive chemicals | Drive: electric (Ex d) or pneumatic | Area classification: Zone 1 or Zone 2

Metering pumps to API 675; piping to ASME B31.3; pressure vessels to ASME Section VIII where applicable; wetted parts to NACE MR0175 / ISO 15156 for sour service; electrical equipment to IEC 60079.

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: pump type, materials and controls selected for your chemical, injection pressure and site utilities, with API 675 metering pumps.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.