The Tech Inc. Hollow Fibre Module Potting Centrifuge pots both ends of hollow-fibre modules at once by spinning them while the resin cures. Centrifugal force drives the resin evenly between the fibres, giving dense, void-free tube sheets, and the heated chamber controls the cure.

Main components

Rotor with arms for two to eight modules, with custom rotors
Heated chamber with temperature control
Variable-speed drive with soft start and stop
Lid interlock and imbalance detection
Touch screen with potting recipes
Resin distributors, potting moulds and module holders

Applications: Hollow-fibre UF, MF, gas separation and dialyser module manufacturing, from lab prototypes to pilot production.

Send your module size, fibre and resin details and target output to mail@techincresearch.com or call +1 (289) 622-1032 for a layout, datasheet and quotation.

Hollow Fibre Module Potting Centrifuge

Bench centrifuge – modules up to about 30 cm.

Pilot centrifuge – modules up to about 70 cm.

Production centrifuge – modules up to about 2 m.
Module length: up to 0.3, 0.7 or 2 m by model

Speed: variable, up to several hundred rpm

Chamber: ambient to 60 °C

Resins: polyurethane and epoxy
Even tube sheets – resin forced between every fibre.

Both ends at once – halves the potting time.

Repeatable – recipes for speed and temperature.

Safe – interlocks and imbalance detection.
Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.

Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.

Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).

Trusted by Saudi Aramco – an established supplier to Saudi Aramco.

Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.

Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).

For this product – we supply hollow-fibre spinning machines, so potting completes our module-making line.
Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.
Centrifugal Potting: Stronger Tube Sheets for Hollow-Fibre Modules

How to Set Up a Hollow-Fibre Module Manufacturing Line
Two-Component Resin Dosing and Mixing Machine – resin dosing and mixing.

Hollow Fibre Module Cutting Guillotine – module end cutting.

Hollow Fibre Module Integrity Tester – module integrity testing.