In-Line Automatic Sampling System

• Pneumatic insertion sampler – for sites with instrument air.
• Electric insertion sampler – where air is not available.
• Retractable sampler – for hot-tap installation and removal without line shutdown.
• Sampler with static mixer – where pipe velocity alone does not disperse water.
• Fixed or portable receivers – piped receivers, or portable receivers for transport to the laboratory.
• Heated and insulated enclosure – heat tracing and insulation for waxy crude.
• LACT and metering integration – sampler controller linked to the flow computer or DCS by Modbus.

• Represents the whole batch – flow-proportional grabs from the pipe centre build a true composite.
• Simple installation – probe-mounted sampler with no loop pump to maintain.
• Retrofit without shutdown – the retractable option allows hot-tap installation.
• Monitored filling – level and weight monitoring on every receiver.
• Continuous sampling – duty and standby receivers.
• Representative laboratory sub-sample – receiver mixing homogenises the composite before analysis.
• Waxy crude ready – heat tracing and insulation prevent wax deposition in the sampler.

Line sizes: 2 in and larger | Pressure: to the line rating | Receivers: sized to fill to target over the batch | Wetted materials: SS 316L standard; Duplex and alloys on request | Area classification: Ex-rated equipment to the specified zone

Engineered to API MPMS Chapter 8.2, ASTM D4177 and ISO 3171, with sample handling to API MPMS Chapter 8.3 or the customer's company standard.

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: sampler, mixing, receivers and controller engineered as one system to API MPMS Chapter 8.2, ASTM D4177 and ISO 3171.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.