Closed-Loop Liquid Spot Samplers

• On-off sampler – for clean, non-volatile streams where an isolation and sample valve straight to the container is enough.
• Bypass sampler – where a flowing loop is available, so the sample never comes from a dead leg.
• Back-purge sampler – where the line must be purged back to process before the container fills.
• Needle-purge sampler – for volatile or toxic liquids that need an emission-free fill through a septum cap.
• Flow-through cylinder sampler – for pressurised or volatile liquids captured by closing both ends of the cylinder.
• Piston-valve sampler – for viscous or high-pour-point products, sampled flush at the pipe wall.
• Fixed-volume, bottle and GC vial samplers – for repeatable volumes into Dopak, Schott Duran and Boston bottles or sealed GC vials.

• No release to air – closed sampling protects operators from vapour and toxic exposure.
• Representative grab samples – no stagnant leg between the process and the container.
• Material matched to the stream – wetted parts from SS 316/316L to Hastelloy C-276, or PTFE-lined.
• Safe handling of hot products – optional sample coolers for hot and high-pour-point streams.
• Fits your laboratory – designed for the bottles, cylinders or GC vials your laboratory uses.
• Clean disposal – purge and flush routed to closed drain or flare.
• Positive isolation – double block and bleed option.

Line rating: up to Class 1500 | Wetted materials: SS 316/316L, Duplex 2205, Super Duplex 2507, 6Mo, Monel 400, INCONEL 625, Incoloy 825, Hastelloy C-276, PTFE-lined | Containers: bottles, sample cylinders, GC vials | Purge and flush: to closed drain or flare | Options: sample cooler, sample box or enclosure, heat tracing, double block and bleed

Designed to Saudi Aramco SABP-A-109 and your company standards; ASTM D4057 and ISO 3170 manual sampling practice; piping to ASME B31.3; sour-service wetted parts to NACE MR0175 / ISO 15156 with EN 10204 3.1 certificates.

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: each sampler engineered to the line rating, stream chemistry and laboratory container, with NACE MR0175 / ISO 15156 wetted parts and EN 10204 3.1 certificates for sour service.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.