The Tech Inc. Braid-Reinforced Hollow Fibre Membrane Line coats a polymer dope onto a braided support to make braid-reinforced hollow fibre membranes, the strong fibres used in submerged MBR and demanding UF duty. Braid runs from a creel through an annular die, where metered dope forms the membrane layer, then through coagulation and washing baths to the winder.

Main components

Braid creel with tension control
Dope vessel and gear metering pump
Annular coating die with concentricity adjustment
Coagulation bath and washing bath
Take-up winder with traverse
PLC and HMI

Applications: MBR membrane production, UF for difficult wastewater, and research on reinforced membranes.

Send your requirement to mail@techincresearch.com or call +1 (289) 622-1032 for a layout, specification and quotation.

Braid-Reinforced Hollow Fibre Membrane Line

Lab line – one braid, short baths.

Pilot line – one to four braids.

Production line – multiple braids and longer baths.
Braid diameter: about 1.5 to 2.5 mm

Line speed: 2 to 30 m/min

Dope temperature: up to 90 °C
High fibre strength – braid carries the load.

Even coating – concentric die and metered dope.

Scalable – lab to production.
Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.

Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.

Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).

Trusted by Saudi Aramco – an established supplier to Saudi Aramco.

Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.

Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).

For this product – we build both spinning and coating lines and test fibres in our own laboratory.
Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.
Braid-Reinforced Hollow Fibre Membranes: Why MBR Uses Them and How They Are Made

Setting Up a Membrane Manufacturing Plant: From Lab Line to Turnkey Factory
Commercial Hollow Fibre Membrane Spinning Line – self-supported fibres.

Hollow Fibre Washing and Post-Treatment System – post-treatment.

Hollow Fibre Module Potting Centrifuge – module potting.