Hydraulic Oil Dehydrator with Fine Filtration

• TI-VDS25H – vacuum hydraulic oil dehydrator with 3-micron fine filter.
• Fixed or mobile mounting – on a base frame beside the power unit, or on wheels to serve several systems, to client specification.
• Yearly oil-care contract – oil checks, filter element changes and dehydrator servicing.

• Fine filtration: 3 micron, or to client specification
• Oil flow: sized to the hydraulic system, or to client specification
• Process: vacuum dehydration at low temperature, followed by fine filtration
• Water removed: free, emulsified and dissolved water
• Fluids: mineral hydraulic oil, or to client specification
• Vacuum pump: a proven component from leading makers
• Controls: PLC with water-in-oil sensor, filter differential-pressure alarm and interlocks

Hydraulic gauge control cylinders on hot and cold rolling mills work close to roll-cooling water, and their servo valves stick or wear when the oil carries water or fine dirt. The TI-VDS25H keeps these systems dry and clean in service. It also suits other mill hydraulic power units, coiler and auxiliary hydraulics, and reconditions oil after a water leak.

• Two jobs in one unit – water removal and 3-micron filtration in a single pass.
• Protects servo valves – clean, dry oil reduces valve sticking and wear.
• Low-temperature drying – vacuum removes water without overheating the oil.
• Oil stays in service – reconditioning avoids a drain and refill.
• Compact – sized for hydraulic systems smaller than the main mill oil system.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – built on the same vacuum design as our mill oil dehydrator, with fine filtration matched to servo hydraulics.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Vacuum Oil Dehydrator for Rolling Mills – the 60 L/min dehydrator for the main mill bearing oil system.
• Rolling Mill Lube and Hydraulic Filter Elements – replacement gauge-control hydraulic and lube elements.
• Hydraulic Power Unit (HPU) – hydraulic power units for process and actuator duties.
• Mobile Oil Filtration Cart – off-line filtration of hydraulic and lube oil.