GC Gas Station (Hydrogen and Zero Air)

• TI-GCS-300 – GC gas station supplying hydrogen and zero air.
• Detector gas supply – hydrogen fuel and zero air for one or more flame ionisation detectors.
• Carrier and detector supply – hydrogen as carrier gas as well, with output sized to suit.

• Gases supplied: hydrogen and zero air
• Hydrogen: PEM electrolysis from deionised water, with output sized to the GC duty
• Zero air: hydrocarbons removed by catalytic oxidation, with output sized to the detector duty
• Outlet pressures: to the GC instrument specification
• Utilities: room air, deionised water and mains power to client specification
• Safety: hydrogen leak detection, pressure relief and automatic shut-down
• Electrical safety: designed to IEC 61010-1 or client specification
• Service: yearly service plan

Every flame ionisation detector burns hydrogen in air, and any hydrocarbon in that air appears as baseline noise. The station feeds both gases from one footprint to GCs in refinery, gas plant and petrochemical laboratories, in environmental laboratories running VOC methods, and in pharmaceutical and food laboratories.

• Two gases, one unit – one footprint, one power connection and one service visit.
• Clean detector air – catalytic hydrocarbon removal keeps the detector baseline low.
• No cylinders – hydrogen and air made on demand at the instrument.
• Built-in safety – leak detection and automatic shut-down on the hydrogen side.
• Yearly service plan – preventive maintenance included with every station.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – hydrogen, zero air and nitrogen generators from one maker, with shared controls and service.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• PEM Hydrogen Generator for Gas Chromatography – hydrogen only, for carrier or fuel gas.
• Nitrogen Generator for LC-MS – nitrogen for LC-MS in the same laboratory.
• Gas Panels and Stream-Switching Systems – distribute generated gas to several analysers.