Produced Water Treatment Package

• CPI separator – corrugated plate interceptor for bulk removal of free oil and settleable solids.
• Oil skimmer – recovers floating oil from separators, tanks and pits.
• Hydrocyclone (deoiler) – compact centrifugal separation of dispersed oil.
• Induced or dissolved gas flotation – fine gas bubbles lift small oil droplets and solids to the surface for removal.
• Nutshell filter – removes remaining oil and suspended solids, with backwash.
• Multimedia or cartridge polishing filter – final polishing before injection or reuse.
• Chemical dosing – treatment chemicals dosed ahead of the separation and flotation stages.

• Treated oil-in-water for disposal: typically below 40 mg/l, or to the client's disposal limit
• Treated oil-in-water for injection: typically below 10 mg/l, or to the client's injection limit
• Stage selection: from the client's water analysis, or to client specification
• Capacity: sized to the produced-water flow rate, or to client specification
• Arrangement: one or more stages on skids, or to client specification

In oil fields and at gathering stations, the package treats water from separators and dehydrators before injection for pressure maintenance or disposal. Refineries and tank farms use it to recover oil from drains and oily effluent before discharge or reuse.

• Equipment from within the group – oil skimmers, filters and dosing systems made by the group.
• Stages sized from a water analysis – only the stages the water needs, each sized to the duty.
• Skid-mounted for fast installation – factory-built stages ready to connect on site.
• One point of responsibility – the complete treatment train from one supplier.
• Measured performance – outlet oil-in-water can be monitored online with an oil content analyser.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product: the group's oil skimmers, filters and dosing systems combined into one package with one point of responsibility.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Oil Content Analyser – online measurement of oil-in-water at the treated-water outlet.
• Chemical Injection Skid – dosing of treatment chemicals ahead of separation and flotation.
• Modular Early Production Facility – includes a produced-water treatment module.
• Desalter Skid – its effluent water is treated in this package.