Solar-Powered Wellhead Control Panel

• Single-string well panel – for wells with one tubing string and a single set of surface and subsurface safety valves.
• Dual-string well panel – for dual completions, with independent control of each string.
• Panel-mounted PV array – modules fixed to the panel for a compact, single-footprint installation.
• Separate PV structure – for larger arrays or where the modules need their own orientation and tilt.
• Standalone or telemetry-connected – local shutdown logic only, or with RTU telemetry for remote monitoring and control.
• Extended-autonomy battery bank – battery capacity sized for longer periods of low sun, to your autonomy requirement.

• No utilities needed – full SSV and SCSSV control without grid power, compressed air or fuel gas.
• No vented gas – replacing gas-driven equipment removes a routine source of methane emissions at the wellsite.
• Low power consumption – latching solenoids draw power only when they change state, and low-power DC pumps keep the load small.
• Day and night operation – the battery bank carries the panel through the night, and the charge regulator prevents overcharge and reverse current.
• Well protection – ESD and fire shutdown logic shut in the well on abnormal conditions.
• Fewer site visits – RTU telemetry lets operators monitor and control the well remotely.
• Built for harsh sites – stainless steel enclosure designed for desert and offshore conditions and ambient temperatures up to 55 °C.

Power: PV modules, charge regulator, battery bank | Wells: single or dual string | Hydraulic supply: to the SCSSV requirement | Telemetry: RTU with Modbus, DNP3 or radio | Ambient: designed for up to 55 °C

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: the power budget and battery autonomy calculated for your well and site conditions, with latching solenoids and low-power pumps to keep consumption down.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.