Gas Booster Unit

• Single-stage booster unit – for moderate pressure ratios, such as accumulator pre-charge from a nitrogen bottle bank.
• Two-stage booster unit – for higher outlet pressures or low inlet supply pressures.
• Accumulator pre-charge kit – booster with charging hoses and adapters for hydraulic accumulators.
• Leak-test booster – for nitrogen or helium leak testing of valves and components.
• Portable or fixed installation – on a portable frame for field and offshore use, or as a fixed panel feeding a workshop test bay.

• No ignition source – the air-driven booster needs no electrical power at the point of use.
• Oil-free gas – oil-free compression keeps lubricant out of accumulators and test pieces.
• Controlled charging – inlet and outlet regulation with calibrated gauges lets the operator charge to the set pressure.
• Overpressure protection – relief valves protect the booster, hoses and the item being charged.
• Protected booster – inlet and outlet filtration keeps particles out of the booster seals and the charged equipment.
• More use from each bottle – boosting lets nitrogen bottles be used down to a low residual pressure instead of being returned part-full.
• Portable and corrosion-resistant – an SS 316 panel on a portable frame for workshop, field and offshore use.

Outlet pressure: up to 10,000 psi typical | Gas: nitrogen, helium or air | Drive: compressed air | Construction: SS 316 panel on portable frame

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: air-driven, oil-free boosting on a stainless panel, with charging hoses and adapters to suit your accumulators.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.