Solar-Powered Chemical Injection Skid

• Single-pump skid – one chemical to one injection point at a remote wellhead or flowline.
• Multi-pump skid – two or more DC metering pumps for several chemicals or injection points.
• Skid-mounted PV array – modules on the skid structure for a single-footprint installation.
• Separate PV mounting – for larger arrays or where the modules need their own orientation.
• Standalone or telemetry-connected – local operation only, or with RTU or cellular telemetry for remote monitoring.
• Extended-autonomy battery bank – battery capacity sized for the specified days of autonomy.

• No grid power or instrument air – the skid generates and stores its own power.
• No vented gas – replacing gas-driven pumps removes a routine source of methane emissions.
• Day and night dosing – the battery bank keeps the pumps running through the night and cloudy periods.
• Protected batteries – the MPPT charge controller manages charging and protects the battery bank.
• Fewer site visits – tank level and pump status monitoring with telemetry option.
• Built for heat – desert-rated enclosure with sun shade and ventilation, designed for up to 55 °C.
• Corrosion resistance – SS 316L tank.

Power: PV modules, MPPT charge controller, battery bank to the autonomy requirement | Pumps: DC metering pumps | Tank: SS 316L | Telemetry: RTU, Modbus or cellular option | Ambient: designed for up to 55 °C

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: the PV array and battery bank sized to your dosing rate, pump power and days of autonomy.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.