Produced Water Cartridge Polishing Skid

• TI-PF100 – two-stage cartridge polishing skid for 100,000 barrels of produced water a day.
• Duty and standby housings – standby capacity on each stage for on-line element change.
• Single-stage polishing – one stage only where the upstream filter already removes coarse solids.

• Capacity: typically 100,000 barrels a day per TI-PF100 skid (about 662 m³/h), or to client specification
• Stages: two (coarse and fine), or to client specification
• Element ratings: selected for the injection water specification, or to client specification
• Design pressure and temperature: to client specification
• Housings: designed to ASME VIII or client specification
• Materials: carbon steel with internal coating, stainless steel or duplex, to client specification
• Element change: on differential pressure, with the standby housing on line

What capacity does one skid treat?
Typically 100,000 barrels a day (about 662 m³/h) per TI-PF100 skid.

How many filtration stages are there?
Two, coarse and fine, with element ratings selected for the injection water specification.

Can elements be changed without stopping injection?
Yes. Change-out is triggered on differential pressure, with the standby housing on line.

Which materials are used?
Carbon steel with internal coating, stainless steel or duplex, with housings to ASME VIII.

Cartridge polishing is the choice where injection water must meet a tight solids specification to keep injection wells and the reservoir from plugging. The skid sits downstream of nutshell filters or gas flotation on waterflood and pressure-maintenance projects, both at onshore gathering centres and on offshore facilities.

• Two-stage protection – the coarse stage takes the bulk of the solids, which extends the life of the fine elements.
• No downtime for changes – standby housings keep water flowing during element change.
• Clear change point – differential pressure on each stage shows when elements are loaded.
• Simple operation – no backwash water, chemicals or media handling.
• Ready spares – replacement cartridges available as standard spares.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – housings, manifolds and controls built in-house, with replacement elements supplied alongside the skid.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Produced Water Treatment: How to Choose the Right Train from Separator to Injection Well

• Walnut Shell Filter – deoiling and coarse solids removal upstream of polishing.
• Induced Gas Flotation (IGF) Unit – secondary deoiling ahead of the polishing skid.
• Deoiling Hydrocyclone Skid – primary deoiling at the start of the train.
• Produced Water Treatment Package – complete package that this unit forms part of.