Gas Sampling Panel – Process, Natural and Sour Gas

• Process and fuel gas panel – purge-fill-vent sampling for routine composition checks.
• Natural gas panel – for composition and calorific value analysis.
• Sour gas and H2S panel – closed purge, with sample box and air ejector for toxic gas.
• Hydrogen and CO2 panel – double block isolation per SABP-A-109.
• Heated and traced panel – keeps hot or rich gas above its dew point.
• Cabinet or open panel – lockable SS 316 cabinet for outdoor installation, or open panel for sheltered locations.

• Nothing at the operator's face – every vent and purge is routed to flare or a safe location.
• Representative samples – the purge-fill-vent sequence replaces stale gas before the cylinder is filled.
• Toxic gas protection – a sample box with air ejector for H2S and other toxic gases.
• No condensation – heated and traced options keep rich gas above its dew point.
• Isolation to company standards – double block at Class 900 and above, and in hydrogen and H2S service.
• Matched hardware – gauges, needle valves and quick-connects matched to the cylinder.
• Secure outdoor installation – stainless steel cabinet with lockable door.

Line rating: to suit the process, up to Class 1500 standard | Wetted materials: SS 316L standard; Monel, INCONEL 625 and Hastelloy C-276 on request | Cylinders: single- or double-ended, sized to the laboratory method | Enclosure: SS 316 cabinet or open panel | Vent: to flare, closed vent or safe location

GPA 2166 and ISO 10715 sampling practice; Saudi Aramco SABP-A-109; NACE MR0175 / ISO 15156 for sour service; piping to ASME B31.3.

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: NACE MR0175 / ISO 15156 wetted parts and a closed purge-fill-vent sequence to flare for H2S service.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.