The Tech Inc. Spiral-Wound Element QC Test Bench (2540 to 8040) tests finished spiral-wound elements before they ship. Elements are loaded into vessels for 2540, 4040 and 8040 sizes, run at standard test conditions, and their permeate flow and salt rejection recorded against the specification. A vacuum decay station checks for leaks before wet testing.

Main components

Test vessels for 2540, 4040 and 8040 elements
Feed tank with temperature control and standard test solution
High-pressure pump on VFD
Flow, pressure, conductivity and temperature instruments
Vacuum decay test station
PLC with test reports per element

Applications: RO and NF element production, element incoming inspection, and refurbishment QC.

Send your requirement to mail@techincresearch.com or call +1 (289) 622-1032 for a layout, specification and quotation.

Spiral-Wound Element QC Test Bench (2540 to 8040)

RO elements – up to 41 bar; 69 bar for seawater elements.

NF elements – lower pressure tests.

Single size – one vessel only.
Element sizes: 2540, 4040 and 8040

Pressure: up to 41 bar; 69 bar option

Report: per element with serial number
100% testing – every element recorded.

Three sizes – one bench.

Leak check – vacuum decay before wet test.
Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.

Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.

Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).

Trusted by Saudi Aramco – an established supplier to Saudi Aramco.

Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.

Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).

For this product – we wind and test spiral-wound elements ourselves.
Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.
QC Testing of Spiral-Wound RO and NF Elements: What to Test and Why

Setting Up a Membrane Manufacturing Plant: From Lab Line to Turnkey Factory
Spiral Wound Element Test Housings – test housings.

Closed-Circuit RO (CCRO) Pilot Test Skid – high-recovery testing.

Batch RO Test Skid with Pressurised Work Exchanger – batch RO.