Rolling Mill Lube and Hydraulic Filter Elements

• TI-EL-M – 38-inch mill lube oil element, an interchangeable replacement for common OEM designs.
• TI-EL-H – gauge-control hydraulic filter element, an interchangeable replacement for common OEM designs.
• System sets – elements grouped by oil system for each planned change.

• Element length: 38 inch for the TI-EL-M; the TI-EL-H to suit the existing housing
• Fit: interchangeable replacement for common OEM designs, with dimensions, end caps and seals measured from reference elements
• Filtration rating and media: matched to the original element, or to client specification
• Fluids: mill lube oil and hydraulic oil
• Seal materials: compatible with the system fluid, or to client specification
• Differential pressure and collapse rating: to the original element or client specification
• Operating limits: pressure and temperature to the housing rating and client specification

Mill lube systems for oil-film roll-neck bearings run large filter banks, and hydraulic gauge control circuits need very clean oil to protect their servo valves. Both use elements that are changed on a fixed schedule or on a differential-pressure alarm. Steel plants with hot strip, plate, bar and cold mills use these elements in routine maintenance and hold them in stock for shutdowns.

• Drop-in fit – no change to housings, piping or the filter bank.
• Measured from your samples – no OEM drawings needed.
• Clean oil – correct filtration protects roll-neck bearings and servo valves.
• Planned changes made easy – elements packed by oil system for each shutdown.
• One source – elements, vacuum dehydrators and oil-care service from one maker.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – elements specified alongside our vacuum dehydrators, so filtration and water removal are matched for each mill oil system.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Lube and Control Oil Filter Elements and Duplex Housings – turbine lube and control oil elements and duplex housings.
• Vacuum Oil Dehydrator for Rolling Mills – removes water from the same mill bearing oil.
• Hydraulic Oil Dehydrator with Fine Filtration – water removal and 3-micron filtration for gauge-control hydraulics.
• Mobile Oil Filtration Cart – off-line filtration between element changes.