Flash-Drum Sampling Station – Design B (Monitored Collection)

• Design B, monitored collection – for operators who need to see drum level and temperature before collecting a 4-litre sample.
• Design A, closed transfer – the alternative where a 1-litre closed-bottle sample meets the laboratory requirement.
• Refinery outdoor installation – with eye-wash station and sun shade at the sample point.
• Gas-oil separation plant and production service – for crude sampling at GOSPs and production facilities.
• Condensate and liquid hydrocarbon service – for condensate and other liquid hydrocarbons at line pressure up to the design rating.

• See before you sample – the level gauge on the drum, rated 1500 psi, shows the contents before collection.
• No hot liquid at the bottle – the thermowell temperature gauge confirms the drum is below 140 °F (60 °C) before collection.
• Controlled depressurisation – throttle valves on the vent give metered let-down.
• One-way flow – check valves on the inlet and vent.
• Hold-to-open valves – spring-return sample and drain valves open only while held.
• Larger laboratory volume – a 4-litre sample bottle for laboratories that need more sample.
• Operator welfare – eye-wash station and sun shade at the sample point, with no power or instrument air required.

Design pressure: 1500 psi | Design temperature: 230 °F | Flash drum: 7.41 L | Sample bottle: 4 L | Process connections: 3 x 1 in Class 1500 RTJ | Wetted parts: INCONEL 625 to NACE MR0175 / ISO 15156 | Instruments: 63 mm glycerine-filled gauges with INCONEL 625 Bourdon tubes and thermowell | Utilities: none

Hydrostatic test at the certified pressure with zero leakage, plus dimensional, visual and full functional bench tests on every unit. Wetted parts receive PMI, dye-penetrant and intergranular corrosion testing, with EN 10204 Type 3.1 certificates per heat. Supplied with operating manual, approved GA and P&ID, test reports and certificates, spares list and serialised nameplate.

• Designed in Canada, built in India – engineering from Vaughan, Canada and manufacturing in Chennai, India give you international design quality with competitive pricing and lead times.
• Built to your specification – we engineer to your P&ID, data sheets and company standards, and submit GA drawings and 3D models for approval before fabrication starts.
• Proven in demanding service – our high-pressure Inconel 625 sampling stations have been supplied in series to Saudi Aramco refineries, and our lab, pilot and skid systems are used by national laboratories, universities and industrial R&D teams.
• Traceable quality – PMI, dye-penetrant and hydrostatic testing as specified, EN 10204 3.1 material certificates, and NACE MR0175 / ISO 15156 materials for sour service.
• Witnessed FAT and full documentation – factory acceptance testing with you or your third-party inspector, and a complete documentation dossier with every unit.
• One point of responsibility – engineering, fabrication, testing, installation support, commissioning, operator training and spares from one supplier.
• For this product: level and temperature indication on the drum, meeting the SABP-A-109 requirement for two-phase pots, with INCONEL 625 wetted parts to NACE MR0175 / ISO 15156.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation support, commissioning, SAT and operator training; spares and after-sales support worldwide.